Kitchen remodeling built around how you actually live
Open-Concept Kitchen Remodeling in Bradenton
Taking down the wall between the kitchen and the living room is one of the most common requests we get in Bradenton, and one of the least straightforward. We plan the structure first, then build the open kitchen you actually pictured.
★★★★★Rated 5.0 by Bradenton area homeowners
Kitchen Remodel
Full-service remodels for Bradenton homes, from layout changes and soffit removal to open-concept conversions, with 3D rendering before a single cabinet is ordered.
Kitchen Cabinets
Custom and semi-custom cabinetry in a full range of door styles, finishes, and hardware, built to replace the builder-grade boxes in newer Bradenton neighborhoods.
Kitchen Countertops
Quartz, quartzite, granite, and marble, selected from full slabs in our showroom rather than two-inch samples, with backsplash and edge profile guidance.
Committed to the highest standards in kitchen renovation
Open-Concept Work Starts With the Structure, Not the Cabinets
A lot of homeowners come to us with the same picture in mind: take down the wall, open the kitchen to the living room, and finally get the bright, connected space the original floor plan never allowed. It is a good goal. But the wall is where the conversation has to start, because in this part of Florida that wall is often doing more than dividing two rooms.
Many of the block homes across Bradenton, and out toward the newer developments in Parrish, were built with load paths that are not obvious from the finished side. A wall that looks like a simple partition can be carrying roof or ceiling load, hiding a plumbing stack, or routing electrical for half the house. Before anyone swings a hammer, we map what that wall is holding and how to carry the load once it is gone, usually with a beam sized to the span and the roof above it.
We do that planning up front rather than discovering it mid-demolition. That is the single biggest difference between an open-concept remodel that runs on schedule and one that stalls for weeks waiting on a structural fix nobody budgeted for. Our showroom sits minutes away on 111th Street, so our designers and installers cover the Bradenton area directly instead of driving in from another county.
What an Open-Concept Remodel Actually Involves
Opening a kitchen is rarely just one job. On most Bradenton projects it pulls in several trades at once, and the order they work in matters as much as the work itself.
The wall comes out only after the temporary support and the new beam are planned. Losing a wall almost always means losing cabinets, so the storage that used to live on that wall has to be rebuilt somewhere, often into a larger island or a reworked countertop run. Flooring has to be patched or replaced across the seam where two rooms become one, and the ceiling frequently needs attention where the old wall met it. Electrical and lighting get rethought for a single larger room rather than two smaller ones.
None of that is unusual, but all of it needs to be decided before demolition rather than during it. When you plan an open kitchen alongside new cabinetry from the start, the pieces line up instead of fighting each other on site.
01.
Builder-Grade Replacement
Opening up a kitchen in an older Bradenton block home is a bigger undertaking than a straight cabinet-and-countertop swap, and the numbers below reflect the way we plan structural work before demolition rather than during it.
02.
Layout & Wall Removal
Opening up closed galley kitchens in older River Road and Erie Road homes, including soffit removal and structural work where needed.
03.
3D and VR Visualization
Walk through the finished kitchen before demolition begins. Clients routinely adjust island size or cabinet height at this stage, which is exactly the point.
04.
Storage Solutions
Custom pantries, islands, roll-outs, and built-in storage designed around how your household actually uses the kitchen day to day.
What We Handle on an Open-Concept Project
An open kitchen touches nearly every part of the room. On a typical Bradenton remodel we take care of:
- Structural planning and beam design for wall and soffit removal
- Full kitchen remodeling, from demolition through final install
- Custom and semi-custom cabinetry to replace storage lost with the wall
- Countertops and larger islands sized for the new open layout
- Relocated electrical, lighting, and any plumbing the old wall was hiding
- 3D renderings and VR walkthroughs so you approve the layout before demolition
Why Older Block Homes Take Extra Care
Concrete block construction is common across Bradenton and it changes how load-bearing work is done. The load path runs differently than it does in a stick-framed house, and tie beams and lintels are already part of the structure. That is not a problem, but it is a reason to plan the opening properly rather than assume the wall is non-structural.
Homes in Lakewood Ranch and the newer east-side communities are usually framed differently again, so we assess each house on its own terms.
How the Process Works
We start with measurements and a conversation about how you want the space to function, produce a 3D design and a VR walkthrough, finalize structure and materials, then schedule the build so the disruptive phase stays as short as possible. You see the open layout before we touch the wall, not after.
Frequently Asked Questions
Can any kitchen wall be removed to open up the space?
Not automatically. Some walls are load-bearing or carry plumbing and electrical, which is especially common in older Bradenton block homes. We determine what a wall is doing before we plan its removal, and we install a properly sized beam to carry any load it was holding.
Do I need a structural engineer or permit?
When a removal involves load-bearing work, it needs proper engineering and permitting. We handle that as part of the project so the beam is sized correctly and the work passes inspection, rather than leaving you to sort it out.
Where does my storage go if I lose a wall of cabinets?
That is one of the first things we design around. The storage usually moves into a larger island, taller perimeter cabinets, or a reworked pantry. We plan it up front so you do not end up with an open room and nowhere to put things.
Can I see the open layout before you start demolition?
Yes. Every project includes 3D renderings, and we offer VR walkthroughs so you can stand in the new open space before the wall comes down. It is far cheaper to move a beam or an island on screen than on site.
How long does an open-concept remodel take?
Longer than a straight cabinet-and-countertop swap, because of the structural work and the flooring and ceiling repairs where two rooms join. We give you a realistic schedule at the design stage and build the plan to keep the disruptive phase short.
Do you work outside Bradenton?
Yes. We handle open-concept remodels across the area, including Sarasota, Palmetto, and Anna Maria Island, all from our Bradenton showroom.
Get a New Amazing Kitchen!
Thinking about opening up your kitchen? Contact us to schedule a consultation and see your new layout in 3D before any wall comes down.
Schedule a Free ConsultationWe Also Serve These Areas
Quality By Design Kitchens
6007 111th St E, Bradenton, FL 34211
(941) 237-0096
Monday–Friday: 8:00 am – 5:00 pm